2013 Modular PDC date changes

This permaculture design certificate will be run over 12 weekends throughout 2013. Each module beginning at 9am. & finishing at 5pm.

The modules will be held at a variety of sites throughout the Waikato, enabling the participants to view different levels of permaculture in practice. 

Participants who want to complete the certificate must do the first module at the beginning of the course but can complete the certificate over 2 years and attend modules in other regions. It is also possible to partake in chosen modules as a part time participant without receiving the certificate.

Module fee:  

$120 / module with the last  module free for those who complete the certificate. Casuals are welcome to attend modules of their choice.

1. Philosophy and Design

Hamilton     February 9th.

Introduction to the ethics & principles of permaculture.Explore realistic priorities for reducing your ecological footprint and designing abundance into your life.

 Design advice is provided to assist you to develop a concept plan for your site, or project that you chose to work at.

2. Climate and Water  

Hamilton           March 2nd.

Global and local weather patterns; climate change. Atmospheric conditions, types of climates and weather.Micro climates – shelter, shade, suntraps, harnessing the wind.

Urban weather patterns (acid rain, urban heat sink, wind patterns & tall buildings).

Air quality, pollution & re-vitalisation.

Introduction to the hydrological cycle.

Water conservation, devices and technology.

Water harvesting and storage (rain water, dams, and swales).Water quality and quantity, purifying and treatment techniques.

 3. Human Sphere      

Ngaruawahia             April 6th.

Cultural values, assumptions and perceptions.

Indigenous resource concepts, kaitiakitanga and Maori metaphysics.

Social permaculture.

Radical citizenship and social ecology, designing for personal and social transformation.

Cooperative decision making, legal structures and ownership. Conflict resolution.

 4.Landscape and Site Assessment

Raglan            May 4th.         

Observation and interactions with nature and the landscape.  Natures reoccurring patterns.

Techniques for observation; measuring and recording landforms; sectors and aspects.

Gathering information of natural conditions, cultural features and requirements.

Water sheds; water catchments and dams Landscape management.

5. Built Environments  Zone 0         

Raglan            June 8th.

Principles of building biology and ecology; Orientation and layout for site and surroundings.

Building design – (warmth & ambience, insulation, passive & active systems, storage, heat pumps, sound, light & electromagnetism).

 Building materials and construction (local earth, straw, timber, embodied energy & toxicity, finishing’s).

 Reuse & recycling – compost toilets, grey water systems, water harvesting & storage

6.Healthy soils and Fertile gardening Zone 1

Hamilton         July 6th.

Nature of soils and soil structure; soil testing  

 Soil health and fertilisers. Composting & revitalisation aids

Tools & maintenance

Zone 1, ecological functions & characteristics. Gardening layout & design- considering the energy flows. Garden preparation double dig or no-dig.  Mulching. ,  Plant & soil health;

companion & rotation planting. Pests &  predators.    Hand in design brief.

7. Small animals and orchard Zone 2

Raglan            August 3th.

Selecting trees/vines/berries/crops etc. for climate and site. Layout for needs in relation to facilities, guilds & diversity.

Planting and propagation; management for productivity and plant health. Integration with small animals (bees, poultry, pigs).
Ecology of plants and animals. Management and care of small animals.

Water requirements, swales & irrigation.

8.Large Animals and Forestry Zones 3-5

A rural site     August 31st.

Animals and soil care – shelter and shade, grazing, herbal ley, fodder crops.    

Water Management

Forest effects and services.

Plantations – For food, alley cropping,

 non-food, timber, firewood etc.

Natural ecosystems – restoration, pest management.      Rongoa

9.Community Resilience                   

Hamilton           September 28th.

Possible natural disasters for our bioregion, pest infestation, social-crime, war and revolution.

Recognising risks and hazards. Coping with dramatic and immediate change.

Job loss and financial collapse, alternative financial systems.

Food foraging and natural medicine sources.

Transition towns.

10.Energy and Technology

Ruapuke         October 19th.

Nature and types of energy.

Energy analysis, efficiency and life-cycle of energy.

Examples of appropriate technologies (high tech & low tech solutions).

Transport & energy alternatives. 

Energy storage; site specific and community based systems.

The 4Rs – reduce, reuse, recycle & repair.

11.Urban Design & Living   

Hamilton              November 16th.

Healthy and sustainable living in cities. & towns.

Community culture; education and values.

Suburban retrofit to reduce your ecological footprint.  Engaging in local communities and councils.

Layout and integration of urban systems; public spaces, transport & circulation, housing, energy supplies & distribution, urban waste cycles, urban food production, storm water, waste water & potable water management.

12.Design  Project Presentations

Hamilton         December 7th.

  • The design project can be completed individually or in groups.
  • It should be completed in a minimum of 20 hours per person per project.
  • Tutors will be available for feedback throughout the process.
  • Projects can be on subject matter the student is interested in, so long it demonstrates the application of sustainable design principles introduced in the first module. This may take the form of a landscape design for an individual dwelling, a retrofit of a house, work with a community group, setting up a local alternative economic model, etc.
  • It is intended that projects be undertaken in parallel to the course so that designs are built on by progressive learning throughout the course.
  • Submit a project brief at module 6
  • At the end of the course, students will be required to do a 15 minute presentation of their project to the tutors and colleagues.
  • Presentations should demonstrate how the design was conceived (design process), the project (final design) and a brief outline on implementation and/ or management.
Advertisements
This entry was posted in Courses & Workshops. Bookmark the permalink.

3 Responses to 2013 Modular PDC date changes

  1. Meliors says:

    are these the firm and final dates?

  2. yabadeh says:

    I’m hoping they are the final dates. Sometimes important things come up for tutors & a change is required.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s